 |
Air Accessory Kits |
 |
|
|
|
 |
| Air System Monitor Kit |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
Monitor Only
p.s.i. Scale
|
2196
|
Continuously monitor your air helper springs with the air pressure monitor kit. Can be installed on any air spring system. Complete with gauge, bracket, and all necessary installation hardware. |
|
|
|
 |
| Remote Fill Station (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
Dial Gauge
Inflation Wand
p.s.i Scale
|
2239
|
The Remote Fill Station offers on-board air source for inflating air springs, tires and any other pneumatic components. Kits include a heavy duty compressor (9210), 3 gallon air tank and a 25" extension hose with inflation wang (2311)
|
|
|
|
 |
| Level Command II (Standard Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
White face
Bar Scale
|
2236
|
The Level Command II utilises a standard duty compressor (9284) and a single gauge.
This system provides equal inflation of both air springs. |
|
|
|
 |
| Dual Electric Air Command |
|
Gauge Type
|
Kit part Number
|
Description
|
|
White Face
p.s.i Scale
|
2436
|
The dual Electric Air Command provides front-to-rear or side-to-side leveling through the use of an electric switch, dual gauge and standard duty compressor (9284). Inflates each spring individually (Two air springs). |
|
|
|
 |
| Remote Air Command I (Light Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
No Gauge
|
2334
|
The Remote Air Command I provides an instant air source, using the 9284 Compressor, for any air helper spring system, leveling the vehicle remotely from up to 50ft. away. No air line to route through the firewall, no gauges or switches to mount on the dash, compact design for easy installation. |
|
|
|
 |
| Remote Air Command II (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
No Gauge
|
2340
|
the Remote Air Command Kit II is the same as the Remote Air Command I above but utilises a heavy duty 9285 compressor |
|
|
|
 |
| Level Command (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
Single white face
|
2097
|
The Level Command kit provides fingertip control of your air springs using a heavy duty compressor(9210). 2097 Provides equal inflation of both air springs.
2219 provides individual inflation of each air spring (two air springs). |
|
|
 |
| Level Command II (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
Dual White Face
|
2219
|
The Level Command II Kit provides fingertip control of your Airsprings using a heavy duty compressor (9210).2219 provides individual inflation of each air spring (two air springs). |
|
|
|
 |
| Dual Air Command II (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
White Face
p.s.i Scale
|
2168
|
The Dual Air Command II provides front-to-rear or side-to-side leveling through the use of a dual gauge, heavy duty compressor (9210) and 1/2 gallon air tank. Inflates each air spring individually.
(two air springs)
|
|
|
 |
| Dual Air Command III (Super Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
White Face
p.s.i Scale
|
2198
|
The Dual Air Command III provides front-to-rear or side-to-side leveling through the use of a dual gauge, super heavy duty compressor (9230) and one gallon air tank. Inflates each air spring individually.
(two air springs) |
|
|
|
 |
| Air Command (Heavy Duty) |
|
Tank Size
|
Kit Part Number
|
Description
|
|
1/2 Gallon
1 Gallon
|
|
The Air Command provides an on-board air source for the Firestone air helper springs and other pneumatic components using our heavy duty compressor, 1/2 or 1 gallon air tank and a 25' extension hose. this system can be used with both Automatic Air Command systems |
|
|
|
 |
| Single Automatic Air Command |
|
Gauge Type
|
Kit Part number
|
Description
|
|
No Gauge
|
2186
|
The single automatic air command inflates both air springs equally through the use of a height control valve mounted between the chassis and the suspension. Use with Kits 2047,2232, or 2239. |
|
|
|
 |
| Dual Automatic Air Command |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
No Guage
|
2017
|
The dual automatic air command inflates both air springs individually through the use of a height control valve mounted between the chassis and the suspension. Use with Kits 2047,2232, or 2239. |
|
|
|
 |
| Single Electronic Height Control (Heavy Duty) |
|
Gauge Type
|
Kit Part Number
|
Description
|
|
No Gauge
|
2332
|
The single automatic air command inflates both air springs, using a ::9285 compressor, equally through the use of a height control valve mounted between the chassis and the suspension. |
|
|
 |
| Complete Wabco Compressor Box |
|
Dimensions (mm)
|
Kit Part Number
|
Description
|
|
Height = 190m
Width = 250mm
Depth = 200mm
|
415 403 402 0
|
Consists of all essentail components in one small box such as 12 Volt Compressor, Air Dryer, Solenoid Valves and Relays. |
|
|
|
 |
| Wabco Height Sensor |
|
Dimensions (mm)
|
Kit Part Number
|
Description
|
|
Height = 90
Width = 65
Depth = 150mm
|
441 050 018 4
|
This height sensor is ideal for use with the Wabco Compressor Box (415 403 402 0) |
|
|
|
DriveRite Ltd , Unit 626 Kilshane Avenue, North West Business Park, Ballycoolin, Dublin 15. Ireland.
Phone + 353 1 8612 632 ; Fax + 353 1 8612 647
|
|
.jpg){kind=small}
.jpg){kind=small}
.jpg)
.jpg)